Client Access problem

[ndevriendt]

Hello,
We've upgraded our iseries AS400 720 from V4R4M0 to V5R1M0. since then we 've got a problem with access of data.
When we check the connection with our server we get the following errorcodes : CWBCO1003,1047 and 1008. On our server we also get a joblog on the job QZDASOINIT with the error CPF24A3 en CEE9901 (Message . . . . : Application error. MCH3601 unmonitored by QZDACRTP at
statement 0000001893, instruction X'0000'. ) Can someone help ?
regards,
Nico

 

[jmd0252]

What version of Client access are you running? I know when we went from V4 to V5, we had to upgrade everyone's client access, so we could continue to connect.

 

[ndevriendt]

Hello,

Our version from client Access is V5R2M0.
We think that the reason is not an client access problem
but a problem on our AS400 because we have there an error on the job QZDASOINIT with the error code CPF24A3 en CEE9901.

Thanks for your time and answer

Devriendt Nico

 

[MdnghtPgmr]

Good morning,

We are on OS/400 V5R1M0 but when I go to help on the Client Access application I see that is V5.5 for Windows. No mod number or release number, just plain old Verison 5.5. Check your Client Access version again, maybe...

HTH,
MdnghtPgmr

 

[ndevriendt]

That's on the client PC.
There I see also V5.5 for Windows

 

[MdnghtPgmr]

Have you installed the latest PTFs? I'm grasping at straws here...

 

[MVerhack]

No, we didn't but we're planning to do so. But we've got no problems on our second server iseries AS400 that is on V5R1M0 also with no PTF's.

 

[jmd0252]

can you "ping" the ip address,,, and also try a simple telnet session, and see what happens

one odd thing,, look at the quser profile / password,, I am hopiong you have a tube tired to the AS400,,that you use as a console.