CLID

[altolabado]

wHEN i DO A PRINT ON MY -CLID- IT GIVES ME ENTRY 0 AND ENTRY1
HOW CAN I DETERMINE WHICH ONE GETS ACCESSED AND WHY.

Sometimes when placing outgoing calls it shows the HLCL of entry 1
and viceversa for entry 0.

Any tips...

 

[acewarlock]

on my system 0 is the default that uses main NPA.

so if I have Key 0 scr 8600 it uses my main NPA plus my Ext number as my CLID on out going call's.

I use 1 and 2 because I have multiple NPA's.
On key 0 scr 7900 1
On key 1 scr 5600 2

the 1 say use new NPA and 2 say use the key with the 1 as CLID on out going calls

 

[johnpoole]

correct, just enter a entry number after the dn..

john poole
bellsouth business
columbia,sc

 

[coniglio]

If Acewarlock has two different CLIDs to reference two different NPAs, where can this info be printed? This is the part I never get...specifically, how do I physically "see" what's entered on each CLID?

 

[johnpoole]

REQ: prt
TYPE: clid
CUST 0
SIZE 256
RNGE

INTL

ENTRY 0
HNTN 803
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 4348232
DIDN NO
HLOC 434
LSC 434

ENTRY 1
HNTN
ESA_HLCL 7000
ESA_INHN NO
ESA_APDN YES
HLCL 7000
DIDN NO
HLOC
LSC

ENTRY 5
HNTN 803
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 434
DIDN YES
HLOC
LSC



john poole
bellsouth business
columbia,sc

 

[coniglio]

and if I wanted to change either of these CLIDs where would I do that? And if I wanted CLID table 5 to show on outbound would I type KEY xx 6789 (space) 5? thanks JohnPoole.

 

[johnpoole]

yes excatly, you change the clid assignment in load 10 or load 11, depending on the set type, just retype the key entry and add the clid after the dn... your clid 5 is not built.. prt your clid in load 21 prt clid...then change it in load 15,,, chg clid entry x (even for a new entry) my entry 5 does send my did exten + area code + npa.. you could add a entry their and have your call display any number you want... (call your wife and tell him your in alaska)...

john poole
bellsouth business
columbia,sc

 

[coniglio]

call your wife and tell HIM you're in Alaska??!!
okay, the only part I still don't get is the CDB's role in this. steps, please! thanks JohnPoole.

 

[johnpoole]

that was a type 0, i meant boss.. clid is a gate opener in the cdb.. clid is home of your clid entries and nothing more

john poole
bellsouth business
columbia,sc

 

[coniglio]

okay, I should be able to figure out which gate opener I need. Figuring out these CLIDs has been a nightmare for me but thanks to your help I think I got it now.