CLID

[StopGo]

Can someone post exact code to add/change the CLID in LD 17? Thanks.

 

[worldwidedialtone]

LD 17 CLID default is NO For calling line ID in the CDR
If Yes
OPT0 for NOrth American Dial Plan
OPT1 default for EURO/ISDN
OPT2 Default used for New Zealand
OPT3 for TIE routes in New Zealand
OPT4 Default for ASIA/PAC
OPT5 default for Austrian interfaces

Not sure if this is what you are asking for or ways to manipulate D channel info

 

[StopGo]

World - thanks for your reply. What I actually need it sot add an entry to the table and the DN's that will use this entry.

 

[kprintz]

Are you sure about LD 17? I have over 50 Nortels networked together and our CLID information is programmed in LD 15 under NET_DATA.

Here is a sample of a CLID table from one of our PBXs.

REQ: prt
TYPE: clid
CUST 0
SIZE 256
RNGE

INTL

ENTRY 0
HNTN 303
ESA_HLCL 921
ESA_INHN NO
ESA_APDN YES
HLCL 921
DIDN YES
HLOC 500
LSC
CLASS_FMT DN

ENTRY 1
HNTN 303
ESA_HLCL 9293601
ESA_INHN NO
ESA_APDN YES
HLCL 9293601
DIDN NO
HLOC 500
LSC
CLASS_FMT DN

ENTRY 2
HNTN 303
ESA_HLCL 939
ESA_INHN NO
ESA_APDN YES
HLCL 939
DIDN YES
HLOC 500
LSC
CLASS_FMT DN

REQ: