Jan 26, 2010 #1 mikethephoneguy Technical User Sep 15, 2006 95 CA What LD do I create CLID tables in?
Jan 26, 2010 1 #3 GHTROUT IS-IT--Management Nov 25, 2005 7,915 US There is a good guide here: http://www.ghtrout.com/ghtrout/files/CLID_Documentation_from_Nortel.zip [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too Upvote 0 Downvote
There is a good guide here: http://www.ghtrout.com/ghtrout/files/CLID_Documentation_from_Nortel.zip [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
Jan 26, 2010 #4 srtelengine Technical User Mar 31, 2006 131 US chances are the table is already built so you would do a change instead of new. To see if it already exist use ld 21 to prt clid Upvote 0 Downvote
chances are the table is already built so you would do a change instead of new. To see if it already exist use ld 21 to prt clid
Jan 27, 2010 #5 johnpoole Programmer May 26, 2004 19,375 US you print clid in 21, you change net is 15.. chg clid is not the command john poole bellsouth business columbia,sc Upvote 0 Downvote
you print clid in 21, you change net is 15.. chg clid is not the command john poole bellsouth business columbia,sc