CLID Table

[hawks]

Option 11c running RLS 25.4
Ok can someone tell me where I can turn off the sending of my PDN when making a call. Right now the called party sees xxxxxxxxxx plus extension.
I just want the 10 digit number to go out.
My phone is set as

Key 0 scr xxxx 0

CLID Table
ENTRY 0
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL xxxxxxxxxx
DIDN NO
HLOC
LSC
CLASS_FMT DN

If I make the call from another key no problem it only shows the ext when making the call from key 0.

 

[acewarlock]

What is the number after
KEY 0 SCR xxxx X if it is 0, then the CLID you posted is the one that controls it.

 

[hawks]

Yes it is 0 but why is it also sending the extension with the call. By using CLID 0 shouldn't it just be sending the 10 digit number without the extension added?

 

[ewaver]

Please post the TNB of the phone.

 

[hawks]

sorry I was out of touch for a couple of days.


XLST
CLS CTD FBD WTA LPR PUA MTA FNA HTA TDD HFA
MWA AAD IMD XHD IRA NIA OLD VCE DRG2
POA DSX VMD CMSD CCSA-CSI SWD LNA CNDA
CFTD SFD MRD ADV CNID CDCA
ICDA CDMD LLCN MCTD CLBD AUTU
GPUA DPUD DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHA FICD NAID
DDGA NAMA
USMD USRA ULAD RTDD PGND OCBD FLXD DNDY DNO1
CPND_LANG ENG
RCO 0
BFTN
HUNT xxxx
LHK 2
LPK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 1105 0 MARP
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 6105 0 MARP
02 SCR 7105 0 MARP

 

[Watsonj]

ESA_APDN is set to YES, which means Append DN to CLID. Set it to NO and see if the problem clears up. However, this will affect all users. There is no reason I can think of that only Key 0 would add the DN since all of your keys are set to use CLID table 0.