CLID problem with QSIG

[NORTELCS]

hi

there is a qsig between nortel and cisco i am using this qsig as trunk to call out side there i no direct trunk on nortel pbx when i have configured for each extention on CLIS entry but the problem ever time when i am calling it remooves the first digit from HLCL.


Extension CLID


ENTRY 255
HNTN
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 56500800
DIDN NO
HLOC
LSC
CLASS_FMT DN

D-channel messages

DCH 16 UIPE_OMSG CC_SETUP_REQ REF 0000001E CH 118 30 TOD 9:25:04 CK CBB9660B
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:6500800 NUM PLAN: E164 TON: INTL
CALLED #:33396655332 NUM PLAN: E164 TON: INTL

 

[NORTELCS]

any idea what is the problem

 

[911guru]

Way too little information.

What is the user dialing?
How is NARS/BARS set up to process those calls?
-ESN Data
-AC1/AC2
-LD 86 and LD 90 information
How is the NET_DATA block configured?

All important information required at a minimum. There is not much anyone could say based on your post, and that is why no one has replied yet.

With the information presented, it could be 100 different things.

911Guru

http://pbx-e911.com

E911 FAQs are located at:

http://www.tek-tips.com/faq.cfm?pid=798&handle=911guru