CLID on calls that tandem through PBX

[dixiedogger]

I have a signaling server set up set up with h323 peer gateways. All calls go to an 81c succession 3.0. When I call an internal extension from the gateway everything is fine the the set shows the internal 4 digit number of the h323 peer but when the call goes to pstn we still only send the 4 digit number. Is there a way to manipulate this where we send the whole number to pstn mabey by having it go through the ld 15 clid tabels.

 

[johnpoole]

do you have clid tables built? if so i would try adding a clid entry.. an ip gateway works so diff from a dch that it would be hard to say without some trial and error.. on a normal dch tandom switch the rcap will send nd3 across without fail.

john poole
bellsouth business
columbia,sc

 

[dixiedogger]

Ok how about this just consider this a norstar tandeming through the succession. It is going to send its 4 digit number to the succession for internal calls is there a way to make the succession prepend the npa and nxx to the front of pstn calls