Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID Issue - TON Display

Status
Not open for further replies.
steeviedude

steeviedude

Technical User
Apr 3, 2010
63
GB
Does anyone know if there is a way for the IPC system to set a Type of Number to National?
Currently the IPC calls transit through a CS1000 via QSIG ISGF link but when they hop off to PSTN CLID defaults to the bearer number. We receive the correct digits but the TON is always UNKNOWN rather than NATL.
 
Sort by date Sort by votes
That would depend on the type of PSTN connection, PRI, BRI or SIP, and the provider's policy with regards to outgoing CLID being something other than what the account has established with the provider.

....JIM....
 
Upvote 0 Downvote
SYQUEST

Sorry, issue is that when the call is initiated from the IPC dealerboard it comes across a tie link to the CS1000 with a TON of UNKNOWN.
Then when it is passed to PSTN it carries this forward and CLID fails.

I want the IPC Dealerboard system to send a TON of NATL (or NPA) is this possible?

Thank you for your time so far
 
Upvote 0 Downvote
TON, type of number? Please explain, I have not seen that term previously...

NPA = Numbering Plan Area or Area Code.

....JIM....
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vitaliyz
  • Locked
  • Question
IPC conference call issue
Replies
2
Views
159
vitaliyz
vitaliyz
gebski
  • Locked
  • Question
BT NewBury Tone Page issue
Replies
1
Views
60
gebski
gebski

Part and Inventory Search

Sponsor

Back
Top