Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID Coming in on PRI

Status
Not open for further replies.

jabst

IS-IT--Management
May 11, 2005
48
0
0
US
I receive number only on incoming calls. CO says they are sending it

ADAN DCH 11
CTYP TMDI
CARD 01
PORT 1
DES PRI
USR PRI
DCHL 1
OTBF 32
PARM RS232 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO
 
did you msgi x on the d in 96? that will show if your getting clid.. the set build usually determines if it displays

john poole
bellsouth business
columbia,sc
 
What is the question?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
This is what is coming in

DCH 11 UIPE_IMSG CC_SETUP_IND REF 00005C0E CH 1 1 TOD 10:44:04 CK 3B029E82
CALLED #:1184 NUM PLAN: UNKNOWN TON: UNKNOWN
PROGRESS: ORIGINATING END IS NOT ISDN
CALLING #:7111234567 NUM PLAN: E164 TON: NATL

DCH 11 UIPE_IMSG CC_DISC_IND REF 00005C0E CH 1 1 TOD 10:44:16 CK 3B03005A
CAUSE: #16 - NORMAL CALL CLEARING

DCH 11 UIPE_IMSG CC_RELEASE_CONF REF 00005C0E CH 1 1 TOD 10:44:16 CK 3B030133
 
That is correct, only the number is displayed. Should msgi also show the cpnd from the CO ?
 
Now we get the question.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top