CLI via analog trunk to embedded analog of 3300 - UK/BT - working?

[fissure]

Hi there,

just wondering if anyone has managed to get caller ID working for incoming calls, coming in via BT analog lines to embedded analog ports of a Mitel 3300?

running CX version II with version 5.0 PR1 (11.0.0.105_1)

CLIP (caller ID presentation) is supposedly enabled on the analog line


we have these (and others) on:
Display ANI / ISDN calling number only = yes
Display ANI / DNIS / ISDN called /calling number = yes
for both the phone COS and the analog trunk COS


System Options has:
UK only - Standard for CLIP: BT
Online help seems to be missing that system option now, but it used to say:
"BT CLIP is supported on peripheral cabinets only"
suggesting it wouldn't work on embedded analog....

but Jakt99 has it working on embedded ports:

http://www.tek-tips.com/viewthread.cfm?qid=1604835

although not in the UK



have tried enabling, individually and together:
ANI/DNIS/ISDN Number Delivery Trunk
in the COS of the analog trunk
and:
CLASS Trunk in the 'CO Trunk Circuit Descriptor'


the calls are going to a phone (5340) which shows CLI for ISDN/SIP calls (so think the phone COS is ok)


having either:
ANI/DNIS/ISDN Number Delivery Trunk
or:
CLASS Trunk in the 'CO Trunk Circuit Descriptor'
causes the Mitel phone not to starting ringing until 4-6 rings after the caller begins ringing


thanks for any tips

 

[Alaa1982]

Dear fissure
"
CLASS Trunk in the 'CO Trunk Circuit Descriptor'
causes the Mitel phone not to starting ringing until 4-6 rings after the caller begins ringing
"

this means that you don't receive the clid from the BT. as the system are waiting to clid before ring.

regards
Ala'a

 

[Supernova99]

Have you tried Class of Service options
These need to be both on the trunks and the set
ONS CLASS/CLIP: Set = Yes
Calling Number Display - Internal - ONS =Yes
ANI/DNIS/ISDN Number Delivery Trunk should always = No
Display ANI / ISDN calling number only = yes
Display ANI / DNIS / ISDN called /calling number = yes

Also is System options you need to set the
UK only - Standard for CLIP: = ETSI
(BT option is only supported on Peripheral cabinets)





Share what you know - Learn what you don't

 

[VanillaJ]

Great! Works in South Africa

 

[kwbMitel]

You do not say that you have the Class option enabled in the Analog Trunk cct Descriptor

Do you?

**********************************************
What's most important is that you realise ... There is no spoon.

 

[IrwinMFletcher]

The 3300 definitely supports ETSI. I believe it's triggered off of the system country option.

 

[wireman50]

I have this working for a customer. Call comes in on a GSM gateway to an analog line on the 3300 and delivers CLI correctly.