CLI presentation problem 1

[Andyv888]

Hi All,

I have an MD110 running TSW SP03 and its linked to a Cisco 3845 gateway via a couple of TLU76/1.

We have just migrated our DDI from our DASS circuits on the MD110 to a SIP provider via CUCM.

The problem I have is that the CLI presentation of the number coming in from the SIP provider is fine on any extension on CUCM but seems stop at 10 digits when passed to the MD110.

Eg 020 86724446 is showing as 020 8672444

From the Cisco 3845 gateway I can see the number is being sent to the MD but the MD just stops at the tenth digit.

The route on the MD is setup as;


ROU TYPE VARC VARI VARO FILTER
88 SL60 H'00000310 H'55440000 H'06300000 NO


ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
88 0110000000000010 5 3110030001 0 30 128 01151515 011110000031 111111


Any help would be greatly appreciated.

Thanks

 

[nithin6926]

Hi Buddy

This seems to be a peculiar issue. I remember I faced the same issue for which we need to implement a patch which Ericsson provided.

You may need to contact Aastra maybe through a partner.

--
Nithin

 

[Andyv888]

Thanks Nithin,

I'll raise it with them.

 

[nithin6926]

Let us know after your issue is resolved.

BR
Nithin

--
Nithin