CLI in Ip office with DTMF to FSK converter

[AT08]

Hi Guys
thanks in advance

I installed a 500v2 with combo card . and customer provide analog trunk.
Can i get the CLI with CLI converter (DTMF TO FSK CONVERTER) b/w analog trunk and avaya .

plz guide me.

any suggestion is appropriate

thanku
with regards
ashish tayal

 

[janni78]

Doesn't setting it to DTMF work? (Under System -> Telephony -> Tones & Music)

CLI Type
This field is used to set the CLI detection used for incoming analogue trunks. Note that the CLI Type field is shown for locales other than Customize. For the Customize locale it is set through the System | System form.The options are:
DTMF
FSK V23
FSK BELL202


"Trying is the first step to failure..." - Homer

 

[AT08]

HI, sorry
actually i wants the CLI without Any CLI converter B/w Analog trunk and avaya


thanku

 

[janni78]

Well, doesn't it work if you set the correct setting (DTMF or FSK) in IPO?

"Trying is the first step to failure..." - Homer

 

[AT08]

PLz guide me how its done

 

[sizbut]

Se the first answer. Start IP Office Manager and press F1, search for FSK.

Stuck in a never ending cycle of file copying.