Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Class of restriction

Status
Not open for further replies.

smarty2929

Technical User
Oct 1, 2012
29
AU
Hi Guys,

I have two different providers. Both are in different Class of restrictions Eg provider A has been assigned (1 to 5) with 1 with ability to make no calls and 5 permitting all sorts of calls.

and Provider B has been assigned (15 to 20) with 15 with ability to make no calls and 20 permitting all sorts of calls.

Problem: I have defined a DN with with COR 1 which means no outgoing calls at all. Somehow calls it permits all calls. This wasn't the case until second trunk came into the picture. To me it seems Mitel is allowing it to make calls from provider 2

Can some1 please advise

 
Okay, take a number that the user can dial and look in ARS digits dialled, check the route it uses and the associated COR group, what COR numbers are in that COR group?

Do you want to restrict certain users from using particular trunks? If so, I would use ARS lists and interconnect restriction to achieve this
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top