CLAN Socket Usage Question

[Armstrong2012]

Hello,

Can anyone educate me on how CLAN socket usage works. If you look at my print out I am wondering why CLAN 01B12 is using 378/400 and why the rest are hovering around 170-180. Does this mean that there is a load balancing problem? Is there any type of report you can run to see if a CLAN has gone over its usage? Thanks in advance.


status socket-usage
SOCKET USAGE

Total Registered IP Endpoints: 1822
Registered IP Endpoints with TCP Signaling Socket Established: 1767
Total Socket Usage: 01814/03600

Intf Board Socket Net Intf Board Socket Net
Type Loc Sfx Usage Rgn Type Loc Sfx Usage Rgn

CLAN 01A11 D 184/400 1
CLAN 01A12 D 187/400 1
CLAN 01A13 D 176/400 1
CLAN 01B12 D 378/400 1
CLAN 01B13 D 176/400 1
CLAN 02A12 D 176/400 1
CLAN 02A13 D 181/400 1
CLAN 02B12 D 177/400 1
CLAN 02B13 D 179/400 1

 

[wpetilli]

are there other things aside from phones that are hard coded to use a specific CLAN... IP trunks.. AES??