This is a very useful document, IMO, that addresses all of the basics, gives a few tips and reghacks, and should cover most eventualities!
I hope this information is useful
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Citrix Printing Presentation 1
- Thread starter CitrixEngineer
- Start date
Hello, I am using one of tyour threads to respond to your responce. When you said 'REG_DWORD' what do you mean. Do I change HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\MemoryManagement\SecondLevelDataCache from 0 to 1024 or do I create another variable. This was about changing NT L2 cache fom default to what is on my mainboard. The registry does have that variable "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\MemoryManagement\SecondLevelDataCache to 0" and it is '0' Sorry, for the bother.
Also, do you know if serial port 1 and 2 can be changed to 16 from 8.
Also, do you know if serial port 1 and 2 can be changed to 16 from 8.
- Status
Similar threads
- Locked
- Question