Citrix Access Gateway (CAG) & PS4.0

[AdminDragon]

Hello,

I have been given a project to use the Citrix Access Gateway to allow user from outside our network access our Presetation Server 4.0. This is the config I am trying to set up, but I haven't been able to find step by step information. The vender we purchased the CAG from isn't any help.

- CAG sits behind a PIX firewall with NAT on port 443
- CAG Interface 0 set with Internal IP address.
- CAG uses LDAP for Authentication
- Citrix Web Interface is on Internal Web Server.

I would like to have the user attach to the CAG Web login and then have the CAG redirc translate the internal Citrix Web Interface while still keeping the SSL connection through the CAG. I don't want to use the VPN client on the CAG or KIOSK mode. When I tested the CAG to redirect the internal Citrix Web Interface it tried to display display the internal web Interface directly on the External web and didn't keep the SSL connection. Thanks for any help or advise.

 

[alexealas]

Did you find the solution? I have the same scenario and was figuring if people answer your request?
Thanks in advance

 

[MereMo]

Have you gotten your answer for this? I just set up the same situation. CAG in DMZ, inbetween 2 firewalls. Webserver inside the LAN. Will share my configs if you haven't gotten an answer. Let me know.

 

[AdminDragon]

MereMo,

I haven't gotten an answer for this yet. Any help would be appreciated.

 

[studlee]

I'm using CAG with Advanced Access Control to do your scenario. CAG is setup to use the AAC. AAC then publishes the user to the Web Interface.