I am reposting this under the BCM Forum because this would apply to either MICS/CICS/BCM. The Citel MCK forum has no information on this issue. Me and another member ItsMyJob are having the same problems.
I have an 8 port existing MCK REMOTE and SWITCH working and need to add more Gateways for the same system so I can add more remote handsets/DN's but can not find the documentation to configure the network to accept more than one Gateway due to port forwarding conflict to port 2698 in the router.
Does anyone have any experience with these units please? The documentation mentions multiple Gateways but provides no directions for programing more than one.
Thanks!
Here is my original thread:
Manuals:
MCK PBX GATEWAY II:
MCK BRANCH EXTENDER 6000
I have an 8 port existing MCK REMOTE and SWITCH working and need to add more Gateways for the same system so I can add more remote handsets/DN's but can not find the documentation to configure the network to accept more than one Gateway due to port forwarding conflict to port 2698 in the router.
Does anyone have any experience with these units please? The documentation mentions multiple Gateways but provides no directions for programing more than one.
Thanks!
Here is my original thread:
Manuals:
MCK PBX GATEWAY II:
MCK BRANCH EXTENDER 6000