Someone please give me a hand on this, I am banging my head against the wall right about now. Ok here we go, I have a Cisco VPN 3002 Hardware Client connecting to a Cisco VPN 3000 Concentrator using PAT mode. The 3002 is at the users home behind a Linksys firewall, I have forwarded ports 500 and 10000 from the Linksys to the Public interface of the 3002 as well as insured that the routes for the remote network that the user is going to access from his home network are in the Linksys, I am able to establish a tunnel successfully but no traffic goes across the tunnel meaning when I check the Sessions on the 3000 the Rx and Tx stay at zero. What am I doing wrong? Thanks in advanced.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!