Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco VPN client update push using ASA
- Thread starter strtrk88
- Start date
kcbell
IS-IT--Management
- Dec 27, 2001
- 275
I assume: based on the thread, you are talking about Cisco AnyConnect VPN client.
I recently updated all client from version 2.2 to version 2.5.
Following is my way and it is working for me.
First you need to downnload the package from Cisco.
Second, you use ASDM to upload the package to the ASA
Third, I SSH into the ASA and changed a line
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.0217-k9.pkg <<<<-- change this line.
svc enable
save the config and that was what I did. There may be other way to do it with the ASDM. But this was the way I did and it works.
Hope this help!
I recently updated all client from version 2.2 to version 2.5.
Following is my way and it is working for me.
First you need to downnload the package from Cisco.
Second, you use ASDM to upload the package to the ASA
Third, I SSH into the ASA and changed a line
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.0217-k9.pkg <<<<-- change this line.
svc enable
save the config and that was what I did. There may be other way to do it with the ASDM. But this was the way I did and it works.
Hope this help!
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question