Russell35674
IS-IT--Management
I am needing to convert all of our Cisco VG from SCCP to MGCP we are using CUCM 11.5 Could someone direct me to a whitepaper or offer step by step or cheet sheet to convert these?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco VG310/320 migrate from SCCP to MGCP
- Thread starter Russell35674
- Start date
- Status
you will need to delete the gateways from cucm and add them back in as MGCP.
Same goes for the gateway config. Remove all the SCCP configuration and add the MGCP commands.
Heres a link to configure MGCP:
Same goes for the gateway config. Remove all the SCCP configuration and add the MGCP commands.
Heres a link to configure MGCP:
- Status
Similar threads
- Question
- Question