Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco Unity Connection Subscriber issue

Status
Not open for further replies.
phonedudeSr

phonedudeSr

IS-IT--Management
Oct 5, 2011
265
US
I have a user that's programmed to forward to CUC after 4 rings. I verified that they are setup correctly in both CUCM and CUC, but the call goes to default message. What can cause this?
 
Sort by date Sort by votes
What do you mean by default message? Main or opening greeting?
make sure the phone line in cucm is in the correct partition and also has the correct vm profile assigned.
 
Upvote 0 Downvote
The DN is configured correctly in CUCM and setup in CUC (same as other DN's and Alias in CUC). it is not going to the VMBX on Unity and getting the Unity default error message that's setup when there's no VMBX configured.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

pbxcomm
  • Locked
  • Question
CISCO VG450
Replies
1
Views
245
bdk76
bdk76
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
236
madwok
madwok
Jared R
  • Locked
  • Question
Cisco UC320W Paging Help
Replies
0
Views
224
Jared R
Jared R
Hayden09
  • Locked
  • Question
Cisco Sg-300 Flapping?
Replies
0
Views
236
Hayden09
Hayden09
JMarine0811
  • Locked
  • Question
CISCO VG450 Factory reset
Replies
1
Views
293
whykap
whykap

Part and Inventory Search

Sponsor

Back
Top