Cisco to Call pilot, using Qsig

[ark5455]

I have set my Cisco phone to hunt to Call Pilot ext however call pilot ans. the call as if I was checking my voice mail "please enter your mail box number" Note my MW light from call pilot is working on the cisco phone Ok. thanks for any help.

 

[johnpoole]

do you have the call pilot ext as a member of the mb? and are you forwarding to the dn and not the acod plus or some other code.. on our setup, untill we used dsc's instead of acod plus cisco dn we have several intergration problems.. now a lot of our stations (maybe 300) fna to there cisco wireless..

john poole
bellsouth business
columbia,sc

 

[MarkoJ]

Hi ark5455,

Are you using a full Cisco CM to power the Cisco phone, if so you will need to run MGCP protocal between your gateway and the CM. If you are running H323 then it's not supported yet, but will be in the next IOS version. If your already running MGCP make sure you are using the RCAP setting QMWI between the CM and the Nortel.

Markoj!