Cisco SW 6513 QOS issue - Match any statement

[Spiky656]

Hello ,I'm a big fan of what I've seen here from professional intervenes. It's my first post here and I would like any expert help me out I've been looking 4 days for a solution but in vain.

I'm trying to set qos for VLAN 254 and police traffic to only 2 Mg , this is easy so far. Problem is I need to put an exception for some users to go beyond the 2 Mg based on source MAC address.

My configuration design is as the below

Class map Test
match ip
match not source-mac xxxx.xxxx.xxxx

Policy map Test
class Test
police 2048000 conform-action transmit exceed-action drop

Interface vlan 254> service-policy output Test
Source-mac is not supported for this interface

-- I don't know what's wrong ! Is their any way around to exclude certain hosts ?
Below is the IOS version

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.2(33)SXH3a, RELEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Wed 24-Sep-08 07:18 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
cisco WS-C6513 (R7000) processor (revision 2.0) with 458720K/65536K bytes of memory.

Thank you very much in advance

 

[Spiky656]

Any one there ? helloooo

 

[keithja]

I am not at all familiar with this area but according to cisco doc '

http://www.cisco.com/en/us/docs/ios/lanswitch/command/reference/lsw_m1.html',

it doesnt appear as if matching by mac is supported on a vlan interface.

However that my not be pertinent to your platform...

 

[Spiky656]

Thank you for your feedback. I will look through your link and report my results here.