Apr 23, 2014 #1 HeathBCT Technical User Dec 13, 2013 223 US Hello All, First time for me not using the IPO as the DHCP server. Does anyone know what option I should put in the cisco config to get the IP phones (9608) to connect to the call server via dhcp through the cisco? Thank you. ACSS - SME
Hello All, First time for me not using the IPO as the DHCP server. Does anyone know what option I should put in the cisco config to get the IP phones (9608) to connect to the call server via dhcp through the cisco? Thank you. ACSS - SME
Apr 23, 2014 Thread starter #2 HeathBCT Technical User Dec 13, 2013 223 US Ok I think it is 242? ACSS - SME Upvote 0 Downvote
Apr 23, 2014 #3 VikeshR Instructor Jun 22, 2012 78 ZA yip 16xx and 96xx phones use option 242 Upvote 0 Downvote
Apr 23, 2014 #4 amriddle01 Programmer May 2, 2007 23,938 GB You should know, it's in every variation of the ACSS exam I have seen, but yes 242 and 176 for 56/46xx Upvote 0 Downvote
You should know, it's in every variation of the ACSS exam I have seen, but yes 242 and 176 for 56/46xx
Apr 23, 2014 Thread starter #5 HeathBCT Technical User Dec 13, 2013 223 US Lol! Yeah it took me a minute to remember What I am also looking for is what parameter I would need to put for the secondary IPO server. We have it set for one for primary and one for failover. ACSS - SME Upvote 0 Downvote
Lol! Yeah it took me a minute to remember What I am also looking for is what parameter I would need to put for the secondary IPO server. We have it set for one for primary and one for failover. ACSS - SME
May 22, 2014 Thread starter #6 HeathBCT Technical User Dec 13, 2013 223 US In case anyone runs into this. Our solution was DHCP helper option through Cisco (similar to dhcp relay) I believe this should prove sufficient. ACSS - SME Upvote 0 Downvote
In case anyone runs into this. Our solution was DHCP helper option through Cisco (similar to dhcp relay) I believe this should prove sufficient. ACSS - SME