CISCO PIX 506 ( HELP getting VPN configured)

[farana75]

Hello guys,

I am trying to set up a VPN remote connection at the Clinic so users can connect from home, but I am having some trouble configuring the VPN.
I ran the VPN wizard, I followed the instructions as instructed. However, when I tried to save the configuration, it gave an ERROR message:
[ERR]vpdn enable outside
Can not enable vpdn on the same interface as PPPoE.

I don't really know what to do. I have done some research on the web, but I still can't figure it out.
I have DSL with a PPPoE connection, on the PIX it shows the Ethernet 0 and Ethernet 1 interfaces UP.
Could someone tell me what I should do to to fix it? I would really appreciate it..
Thanks,
Fernando

 

[NetworkGhost]

You wont be able to do ppptp when using pppoe. You can however do a client ipsec tunnel.

Here is a link:

http://www.cisco.com/warp/public/110/B.html

 

[farana75]

NetworkGhost, thank you for your reply..I will give it a try.