fieryhail
IS-IT--Management
- Mar 12, 2010
- 92
Having some weird issues with Cisco MVA. CUCM 7.1.5. Using SIP trunks from bandwidth.com. SIP trunks are terminated into a 3745 router running CUBE. CUCM is connected to the c3745 gateway via h.323. Inbound and outbound calls work flawlessly through the SIP trunks,. I believe I have MVA configured properly. I can dial inbound on the DID that I assigned as the MVA DN, however I get the message that "I am not authorized to make calls, please contact your administrator.". There are appropriate dial-peers setup as well. I'm currently using complete match for recognizing CallerID, although I've tried it with partial also, same results. The remote destination profiles are setup correctly also as well as the actual remote destinations. This is an error message from the IVR that I am unfamiliar with. Does anyone have any ideas as to what may be going wrong? Thanks in advance!