Cisco IP phone registered in TSE 2

[rfpup]

thread806-1763650

Hello, referring to the thread above I am interested to know if someone has tested cisco IP phones registered in TSE. I would really appreciate if someone is sharing his/her experience on interoperability and features that can work / not work with cisco ip phones

 

[inlsp05]

Hi you cab register cisco but you most load open sip firmware on cisco phone.

 

[rfpup]

Thank you inlsp05,

Has someone tested the features of IP phone Cisco with open sip firmware?

 

[inlsp05]

Feature? No just call and answer to call.

 

[rfpup]

Thank you inlsp05,

If somebody else has additional information to add is welcomed

 

[mdloser]

Hi,

I have done that a long time ago with a 7941 and mx-1 v.4.1. I followed the instructions in the link below:

http://www.adrianandgenese.com/blog...940-7960-794x-796x-797x-phone-to-sip-or-sccp/

 

[rfpup]

Hi mdloser
Thank you

 

[mdloser]

From the new SIP based versions I checked Cisco SPA303 si Linksys SPA921, seem to work well (basic call feature of course).

Dir Cust Terminal Type Revision Vendor
6101 0 SIP SPA303-7.4.9c Cisco
6102 0 SIP SPA921-5.1.8 Linksys
6144 0 SIP SPA303-7.5.5 Cisco