Hey mate you want to send an e-mail to jbonicioli@infolex.gr and i will send you a Cisco 801 working cfg file for Internet Access. We got that at work and its working fine....
Here is one I found (similar to what you want) in a thread on this site. I will send you ours though if you e-mail me!!!! Hope i modified this one right. Best download your cfg and modify the Password fields and dial-up details.
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Pennygroes (or whatever)
!
enable secret 5 $1$6mk0$ADxuHxAi8zV8Yg2W5BUKh/ (Your passes)
enable password a
!
memory-size iomem 25
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-net3
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn send-alerting
ppp authentication chap pap callin
!
interface FastEthernet0
ip address 10.10.10.200 255.255.255.0
ip nat inside
speed auto
half-duplex
!
interface Dialer1
description Connected To BT Internet
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer idle-timeout 40
dialer string 08457576111
dialer max-call 4096
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname (Your ISP LOGIN)
ppp chap password
ppp pap sent-username (Your Username ) password (Your Password)
!
!
ip nat inside source list 1 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
!
access-list 1 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
line con 0
transport input none
line aux 0
line vty 0 4
password a
login
!
no scheduler allocate
end
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.