Cisco DID PRI tandem through OPT 81 DID PRI 1

[3cross]

WE have a Cisco Call Manager sending calls (9xxxxxxx) to our Opt 81 rls 25.30 and want them to go out the local DID PRI. The calls hit the Opt 81 and go straight to VM. WE can see all the digits on the DCH coming from the Cisco. If you are on a trunk you can transfer a call out another trunk route no problem. This is not QSIG and we don't have that option.
Any ideas?

 

[3cross]

We changed the rt. from the Cisco to a tie rt. and it works.

 

[PhonemanSam]

You need to build a IDC entry to re-insert the 9. They dialing 9 in the Cisco but you not seeing the 9 because it just like in the Nortel where you dial 9 to make a external call.

 

[3cross]

The 9 is coming from the Cisco and all works well now that it is built as a tie. When it was a DID it would not look at more than 4 digits because of the LDN0.