Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cisco CM 4.2.3 and BCM

Status
Not open for further replies.
riteeh

riteeh

Programmer
Mar 2, 2004
107
CA
Hello,

Just curious if anyone has been able to configure a Cisco CM to talk to a BCM 50/200/400 through IP trunks? I've found the documentation at Cisco.com to do this with a CS1000, but nothing relating to the BCM platform. Is this possible and if so what is your configuration?

Thanks in advance.
 
Sort by date Sort by votes
It should be the same .Since BCM could work with CS1k through H323,SO we also could use H323 to connect BCM with CCM

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CMUK
  • Question
Cisco UCM twinning?
Replies
4
Views
229
CMUK
CMUK
mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
570
mikedphones
mikedphones
B
  • Locked
  • Question
Cisco IP Phone 7841 8851 unable to forward to external number
Replies
2
Views
263
keyset6
keyset6
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
674
thepfy
thepfy
Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
631
whykap
whykap

Part and Inventory Search

Sponsor

Back
Top