Cisco cert lab

[Cataclysm45]

Hey yall,

I have in my posession a cisco certification lab and need help with haveing a 2620 cisco router to a loopback ive been fighting with this for about a week and would like any feedback i can get from you guys.

Thank you

 

[Lemon13]

whats your problem?

http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93c4.shtml

http://www.networkliquidators.com/article-cisco-ccna-exam-tutorial-loopback-interfaces.asp

M. Knorr

MCSE, MCTS, MCSA, CCNA

 

[Cataclysm45]

thanks for the refrences lemon.

my problem is that im new to cisco networking devices and i dont understand how to move around in a cisco router.

im useing hyperterminal with the right settings i just dont understand how to get in to the loopback inferface.

To learn anything you must first admit you know nothing.

 

[Lemon13]

theres no loopback interface, u first have to define one

R1#conf t
R1(config)#interface loopback0
R1(config-if)#ip address 192.168.0.100 255.255.255.0

M. Knorr

MCSE, MCTS, MCSA, CCNA

 

[lerdalt]

how do you mean "get in to the loopback interface"? Are you trying to telnet to it instead of using the console connection?

 

[Cataclysm45]

i am using a console port on the router i thought there was a interface i was trying to get to but i was wrong thanks everyone who replied to help me

To learn anything you must first admit you know nothing.