Cisco Can Confiure For Dial Up Modems?? 1

[madmondeoman]

Ok I am new to cisco stuff and just starting my ccna. The question is it possible to configure a cisco router to dial up to an isp with a analogue modem. Some say no and soem say yes. See the following and it looks like yes i know it was windows 95 so not sure whether it will work on windows 2000 or xp

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008017acac.shtml

Any ideas or suggestions please.


Thanks

Shaun

 

[BuckWeet]

yes its totally possible, you can use the AUX port to do it.. I've done it myself..

 

[madmondeoman]

Hi thanks for the help.

shaun

 

[filoloxnyc]

Anybody have a sample config on this? I tried configuring a 2600 using the AUX port for a USR modem. It didn't seem to work.

I was trying to have the 2600 dial up to the ISP then route the traffic.

Thanks!

 

[madmondeoman]

Hi can you post your config on here, see what you have. Hopefully BuckWeet may help us on this. Buckweet what router did you do this on??

Thanks

Shaun

 

[dx1]

Try this:

http://www.cisco.com/warp/public/471/mod-aux-dialout.html