Cisco CallManager Attendant Console

[JacobNunley]

For some reason today our attendant console shows every DN in a unknown state. I have restarted the TCD service but that did not fix the problem. any ideas?


Thanks

Jacob

 

[jeter]

What version of Call Manager are you using?

The last time I had this problem I had to stop and restart the service.


SPC NVARNG
Tek-TIP Member 19,650

 

[JacobNunley]

Call Manager 4.1

 

[sienz]

I have the same issue with CM 6.1. Where can i find the TCD service? I would try to stop and restart the service first.

 

[trvlr1]

Lack of memory or hard drive space could cause this too. Checking to see if your system has system logs which are now huge is a good place to start if this is the case.

 

[pndscm]

Check your firewall settings also if you are using this on XP or Vista. Temporarily turn it off and see if it makes a difference.

 

[Iwontremember]

Jeter is right, restart the attendent service.

Hope this helps.

Please remember to rate helpful posts........