I have a cisco asa 5510 base license, i configure the interfaces as follows
interface 0/0 -----outside
interface 0/1 --- DMZ(server)
interface 0/2---- inside1
interface 0/3 ----inside2
inside 1 and inside 2 can access DMZ can view and search the shared files.
on the DMZ we have a foxpro application, inside 2 to DMZ connection using foxpr application function correctly.
But the inside1 to DMZ has an error on the fox pro application it state that connection problem. But i can browse the database and other shared files. But when we encode data inthe fox pro it has an error that write failed.
I used dynamic NAT from inside1 to DMZ and inside2 to DMZ.
can anyone help me on this .
Thanl you
interface 0/0 -----outside
interface 0/1 --- DMZ(server)
interface 0/2---- inside1
interface 0/3 ----inside2
inside 1 and inside 2 can access DMZ can view and search the shared files.
on the DMZ we have a foxpro application, inside 2 to DMZ connection using foxpr application function correctly.
But the inside1 to DMZ has an error on the fox pro application it state that connection problem. But i can browse the database and other shared files. But when we encode data inthe fox pro it has an error that write failed.
I used dynamic NAT from inside1 to DMZ and inside2 to DMZ.
can anyone help me on this .
Thanl you