Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco Analog Modem Config
- Thread starter longy12
- Start date
- Thread starter
- #3
try a reverse telnet session to the modem then write
AT if the modemes working proper u have to recieve in the row
OK
otherwise checkmodems configuration in case it is external
also try to use the command MODEM AUTO CONFIGURE in line config mode
AT if the modemes working proper u have to recieve in the row
OK
otherwise checkmodems configuration in case it is external
also try to use the command MODEM AUTO CONFIGURE in line config mode
- Status
