Cisco 831 Easy vpn server

[Kernalx69]

Hi

On the company there i work we have a cisco 831.
I have configured it with help of SDM.

Everything works perfectly and it is configured to accept vpn connection from users and i use xauth.
Now i also want to have a site-site connection that don't use xauth

Then i try to configure a site-site connection with the SDM utility it says it is going to reset my vpn configuration.
To me it looks like it doesn't accept both client and site-site connection at the same time.

How can i do ?



Please i need answer fast !

Best regards

 

[boymarty24]

The 831 works great with both site to site and mobile vpn. it shouldnt be any problem at all.

Maybe the reset warning means that current tunnel will be reseted for the new configuration to be activated!?

Save your config and copy run start. Then apply the new site to site tunnel. If the client vpn doesnt work after that just reload the cisco. The configuration will not be saved if you dont load it into the startup config.

 

[Kernalx69]

Hi

You have correct !

The reset warning was just that the tunnel will be reseted.

Thank you.