I have a Cisco 831 router, and I am trying to use it with my cox cable business account and a static IP. I'm pretty new to cisco IOS, and not sure if I have everything setup correctly. Here is my running config. Can anyone give me some ideas if I am doing this right? Thanks...
Current configuration : 1226 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname lanrouter
!
enable secret 5 $1$OBXF$OjbPlOeV7H8kUL7xc7qQa.
!
username CRWS_Prem privilege 15 password 0 $1$W1fA$o1oSEpa1038159184
username CRWS_Shashi privilege 15 password 0 $1$W1fA$o1oSEpa161697005
username CRWS_Kannan privilege 15 password 0 $1$W1fA$o1oSEpa1040563783
username CRWS_Jaidil privilege 15 password 0 $1$W1fA$o1oSEpa904997320
ip subnet-zero
no ip routing
!
ip audit notify log
ip audit po max-events 100
!
!
!
!
interface Ethernet0
description Internal LAN
ip address 192.168.0.1 255.255.255.0
ip nat inside
no ip route-cache
no ip mroute-cache
hold-queue 100 out
!
interface Ethernet1
description External WAN
ip address static.ip.here 255.255.255.224
ip nat outside
no ip route-cache
no ip mroute-cache
!
ip classless
ip http server
!
!
snmp-server community litigation RO
snmp-server enable traps tty
!
line con 0
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
end
Current configuration : 1226 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname lanrouter
!
enable secret 5 $1$OBXF$OjbPlOeV7H8kUL7xc7qQa.
!
username CRWS_Prem privilege 15 password 0 $1$W1fA$o1oSEpa1038159184
username CRWS_Shashi privilege 15 password 0 $1$W1fA$o1oSEpa161697005
username CRWS_Kannan privilege 15 password 0 $1$W1fA$o1oSEpa1040563783
username CRWS_Jaidil privilege 15 password 0 $1$W1fA$o1oSEpa904997320
ip subnet-zero
no ip routing
!
ip audit notify log
ip audit po max-events 100
!
!
!
!
interface Ethernet0
description Internal LAN
ip address 192.168.0.1 255.255.255.0
ip nat inside
no ip route-cache
no ip mroute-cache
hold-queue 100 out
!
interface Ethernet1
description External WAN
ip address static.ip.here 255.255.255.224
ip nat outside
no ip route-cache
no ip mroute-cache
!
ip classless
ip http server
!
!
snmp-server community litigation RO
snmp-server enable traps tty
!
line con 0
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
end