Cisco 811 Configuration Help - Willing to pay

[Logmaster]

Hi,

I am looking to someone who can configure our Cisco 811 router. We will pay for the service.

Please contact me at oren2010@gmail.com if you are capable of covering the following topics:

1. 2 WAN interfaces with redundancy.
2. Firewall with DMZ and one server in it.
3. Incoming ports and a few incoming port ranges.
4. Security, Easy VPN.
5. Access rules. inside to dmz, inside to outside, outside to DMZ.
6. DDNS.
7. Static Routes

Regards,
Joe

 

[Minue]

Hello
Try posting in the Firewall forum.It's mostly security configurations .You will need someone with a CCSP skills.
Regards

 

[burtsbees]

Are you sure it's an 811 rather than 1811? What IOS does it have?

Burt

 

[Logmaster]

Yes, I am sorry, it's the 1811.

 

[burtsbees]

Please post a sh ver...
router>en
router#sh ver

Burt

 

[Logmaster]

Matrix#sh ver
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(4)T,
RELEASE SOFTWARE (fc1)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 26-Oct-05 19:48 by ccai

ROM: System Bootstrap, Version 12.3(8r)YH6, RELEASE SOFTWARE (fc1)

Matrix uptime is 14 hours, 21 minutes
System returned to ROM by power-on
System image file is "flash:c181x-advipservicesk9-mz.124-4.T.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 1811 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of mem
ory.
Processor board ID FHK1017529B, with hardware revision 0000

10 FastEthernet interfaces
1 Serial interface
1 terminal line
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

 

[plshlpme]

what will your 2 wan interfaces be?
i see one serial... what is your second wan?

 

[Logmaster]

Hi,

This router has two Ethernet WAN ports, one is connected to a DSL line and the other one connected to a cable modem...

 

[Minue]

Hello
Is your router up and running already?Please post a config.Will you be using the 1811 built-in firewall or do you have a stand-alone?
For the reduncany you can use two static default routes with admistrative distance.
ip route 0.0.0.0 0.0.0.0 fastEthernet 0/0 1
ip route 0.0.0.0 0.0.0.0 fastEthernet 0/1 2
You should do this configuration step-by-step.Test the config and move on.When you post the firewall info we can move to step two.With all the guys working together I think you will have a better chance at having the best config.Than having one person work on it.
Regards