I have a Cisco ICM with 7960 sets. I recently replaced one of the 7960s and the PC port on the set quit working. I replaced the set and had the same problem. Is there a parameter to disable the PC port? If so; where do I find it? If not; suggestions are appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco 7960 PC Port
- Thread starter Tekman111
- Start date
MrToad6378
Technical User
Go into the Phone Configuration for the phone in question. Scroll down to the bottom. There is a PC Port setting. Make sure it in enabled. If it is check the switch port.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question