I have a cisco 3640 with a 2 wan port FastEthernet module and a wict1 card in it. I have assigned the card an ip address. On my other end I have a cisco 1720 with the same card in it assigned an IP address.
SO here is an example
Cisco3640 t1 CSU/DSU
ip address 10.10.10.1/30
Cisco1720 T1 CSU/DSU
ip address 10.10.10.2/30
OK....Now I can ping the 1720 interface and I can ping the ethernet interface on the 1720 but I cannot ping my own interface in my 3640 from inside the router. I can ping it from my lan or the other router but I cannot ping it in my own router.
Any help or ideas on this would be greatly appreciated.
Thanks
Ron
SO here is an example
Cisco3640 t1 CSU/DSU
ip address 10.10.10.1/30
Cisco1720 T1 CSU/DSU
ip address 10.10.10.2/30
OK....Now I can ping the 1720 interface and I can ping the ethernet interface on the 1720 but I cannot ping my own interface in my 3640 from inside the router. I can ping it from my lan or the other router but I cannot ping it in my own router.
Any help or ideas on this would be greatly appreciated.
Thanks
Ron