I want to check that my switches' current config is setup properly. I would appreciate if you guys could check out my config.
I'm having DHCP lease issues where my DHCP server is reporting BAD ADDRESS like crazy. I read that I should check to see if ARP cache is activated on the switch and to disable it. I also wanted to make sure that this config is setup properly for maximum Ghost Multicasting speed.
Here is a quick run down along with my config.
Nomadix WiFi Gateway (port 43)
Win 2003 DHCP Server (port 44)
Netgear 5 Port GB Switch p/n - GS105 (port 45)
Linksys SRW2024(port 46)
Microsoft ISA Server (connected to port 47)
Cisco 1721 Router (connected to port 48)
----------------------------
Cisco Systems, Inc. Console
Console> (enable) sh conf
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
.................
.............................
..
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Fri Jul 10 2015, 06:36:16
!
#version 8.3(2)GLX
!
!
#system web interface version(s)
set password $2$7oph$eM1AwKQot40vEUFDuTBsQ/
!
#dot1x
set feature dot1x-radius-keepalive disable
!
#frame distribution method
set port channel all distribution mac both
!
#snmp
set snmp community read-only netjamrosnmp
!
#vtp
set vtp domain netjam
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm
set vlan 1
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off
!
#ip
set interface sc0 1 192.168.0.7/255.255.255.0 192.168.0.255
set interface sl0 down
set interface me1 down
set ip route 0.0.0.0/0.0.0.0 192.168.0.1
set ip alias default 0.0.0.0
!
#spantree
#uplinkfast groups
set spantree uplinkfast enable rate 15 all-protocols off
#vlan <VlanId>
set spantree priority 49152 1
!
#syslog
set logging console disable
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000-k8.8-3-2-GLX.bin
!
#port channel
set port channel 2/1-4 105
set port channel 2/5-8 106
set port channel 2/9-12 107
set port channel 2/13-16 108
set port channel 2/17-20 109
set port channel 2/21-24 110
set port channel 2/25-28 111
set port channel 2/29-32 112
set port channel 2/33-36 113
set port channel 2/37-40 114
set port channel 2/41-44 115
set port channel 2/45-48 116
!
#multicast filter
set igmp filter disable
!
#module 1 : 0-port Switching Supervisor
!
#module 2 : 52-port 10/100/1000 Ethernet
set port name 2/48 Router
set port flowcontrol 2/1-47 send on
set port flowcontrol 2/48 receive desired
set trunk 2/1 off dot1q 1-1005,1025-4094
set trunk 2/2 off dot1q 1-1005,1025-4094
set trunk 2/3 off dot1q 1-1005,1025-4094
set trunk 2/4 off dot1q 1-1005,1025-4094
set trunk 2/5 off dot1q 1-1005,1025-4094
set trunk 2/6 off dot1q 1-1005,1025-4094
set trunk 2/7 off dot1q 1-1005,1025-4094
set trunk 2/8 off dot1q 1-1005,1025-4094
set trunk 2/9 off dot1q 1-1005,1025-4094
set trunk 2/10 off dot1q 1-1005,1025-4094
set trunk 2/11 off dot1q 1-1005,1025-4094
set trunk 2/12 off dot1q 1-1005,1025-4094
set trunk 2/13 off dot1q 1-1005,1025-4094
set trunk 2/14 off dot1q 1-1005,1025-4094
set trunk 2/15 off dot1q 1-1005,1025-4094
set trunk 2/16 off dot1q 1-1005,1025-4094
set trunk 2/17 off dot1q 1-1005,1025-4094
set trunk 2/18 off dot1q 1-1005,1025-4094
set trunk 2/19 off dot1q 1-1005,1025-4094
set trunk 2/20 off dot1q 1-1005,1025-4094
set trunk 2/21 off dot1q 1-1005,1025-4094
set trunk 2/22 off dot1q 1-1005,1025-4094
set trunk 2/23 off dot1q 1-1005,1025-4094
set trunk 2/24 off dot1q 1-1005,1025-4094
set trunk 2/25 off dot1q 1-1005,1025-4094
set trunk 2/26 off dot1q 1-1005,1025-4094
set trunk 2/27 off dot1q 1-1005,1025-4094
set trunk 2/28 off dot1q 1-1005,1025-4094
set trunk 2/29 off dot1q 1-1005,1025-4094
set trunk 2/30 off dot1q 1-1005,1025-4094
set trunk 2/31 off dot1q 1-1005,1025-4094
set trunk 2/32 off dot1q 1-1005,1025-4094
set trunk 2/33 off dot1q 1-1005,1025-4094
set trunk 2/34 off dot1q 1-1005,1025-4094
set trunk 2/35 off dot1q 1-1005,1025-4094
set trunk 2/36 off dot1q 1-1005,1025-4094
set trunk 2/37 off dot1q 1-1005,1025-4094
set trunk 2/38 off dot1q 1-1005,1025-4094
set trunk 2/39 off dot1q 1-1005,1025-4094
set trunk 2/40 off dot1q 1-1005,1025-4094
set trunk 2/41 off dot1q 1-1005,1025-4094
set trunk 2/42 off dot1q 1-1005,1025-4094
set trunk 2/43 off dot1q 1-1005,1025-4094
set trunk 2/45 off dot1q 1-1005,1025-4094
set trunk 2/46 off dot1q 1-1005,1025-4094
set spantree portfast 2/43-48 disable
set spantree portfast 2/1-42 enable
set spantree bpdu-guard 2/1-48 disable
set spantree portinstancecost 2/10 cost 19999 mst
set spantree portinstancecost 2/14 cost 19999 mst
set spantree portinstancecost 2/20 cost 19999 mst
set spantree portinstancecost 2/23 cost 19999 mst
set spantree portinstancecost 2/24 cost 19999 mst
set spantree portinstancecost 2/25 cost 19999 mst
set spantree portinstancecost 2/26 cost 19999 mst
set spantree portinstancecost 2/28 cost 19999 mst
set spantree portinstancecost 2/29 cost 19999 mst
set spantree portinstancecost 2/30 cost 19999 mst
set spantree portinstancecost 2/31 cost 19999 mst
set spantree portinstancecost 2/32 cost 19999 mst
set spantree portinstancecost 2/33 cost 19999 mst
set spantree portinstancecost 2/34 cost 19999 mst
set spantree portinstancecost 2/35 cost 19999 mst
set spantree portinstancecost 2/36 cost 19999 mst
set spantree portinstancecost 2/37 cost 19999 mst
set spantree portinstancecost 2/38 cost 19999 mst
set spantree portinstancecost 2/39 cost 19999 mst
set spantree portinstancecost 2/40 cost 19999 mst
set spantree portinstancecost 2/42 cost 19999 mst
set spantree portinstancecost 2/43 cost 19999 mst
set spantree portinstancecost 2/47 cost 19999 mst
set spantree portinstancecost 2/48 cost 19999 mst
set spantree portinstancecost 2/49 cost -1 mst
set spantree portinstancecost 2/50 cost -1 mst
set spantree portinstancecost 2/51 cost -1 mst
set spantree portinstancecost 2/52 cost -1 mst
set spantree portcost 2/40 3100
set spantree portcost 2/41 3100
set spantree portcost 2/43 3100
set spantree portcost 2/44 3100
set spantree portcost 2/45 3100
set spantree portcost 2/47 3100
set spantree portcost 2/1,2/21,2/46 3019
set spantree portcost 2/10,2/14,2/20,2/23-26,2/28-39,2/42 3004
set spantree portvlancost 2/1 cost 3018
set spantree portvlancost 2/10 cost 3003
set spantree portvlancost 2/14 cost 3003
set spantree portvlancost 2/20 cost 3003
set spantree portvlancost 2/21 cost 3018
set spantree portvlancost 2/23 cost 3003
set spantree portvlancost 2/24 cost 3003
set spantree portvlancost 2/25 cost 3003
set spantree portvlancost 2/26 cost 3003
set spantree portvlancost 2/28 cost 3003
set spantree portvlancost 2/29 cost 3003
set spantree portvlancost 2/30 cost 3003
set spantree portvlancost 2/31 cost 3003
set spantree portvlancost 2/32 cost 3003
set spantree portvlancost 2/33 cost 3003
set spantree portvlancost 2/34 cost 3003
set spantree portvlancost 2/35 cost 3003
set spantree portvlancost 2/36 cost 3003
set spantree portvlancost 2/37 cost 3003
set spantree portvlancost 2/38 cost 3003
set spantree portvlancost 2/39 cost 3003
set spantree portvlancost 2/40 cost 3099
set spantree portvlancost 2/41 cost 3099
set spantree portvlancost 2/42 cost 3003
set spantree portvlancost 2/43 cost 3099
set spantree portvlancost 2/44 cost 3099
set spantree portvlancost 2/45 cost 3099
set spantree portvlancost 2/46 cost 3018
set spantree portvlancost 2/47 cost 3099
set port channel 2/1-48 mode off
end
Console> (enable)
I'm having DHCP lease issues where my DHCP server is reporting BAD ADDRESS like crazy. I read that I should check to see if ARP cache is activated on the switch and to disable it. I also wanted to make sure that this config is setup properly for maximum Ghost Multicasting speed.
Here is a quick run down along with my config.
Nomadix WiFi Gateway (port 43)
Win 2003 DHCP Server (port 44)
Netgear 5 Port GB Switch p/n - GS105 (port 45)
Linksys SRW2024(port 46)
Microsoft ISA Server (connected to port 47)
Cisco 1721 Router (connected to port 48)
----------------------------
Cisco Systems, Inc. Console
Console> (enable) sh conf
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
.................
.............................
..
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Fri Jul 10 2015, 06:36:16
!
#version 8.3(2)GLX
!
!
#system web interface version(s)
set password $2$7oph$eM1AwKQot40vEUFDuTBsQ/
!
#dot1x
set feature dot1x-radius-keepalive disable
!
#frame distribution method
set port channel all distribution mac both
!
#snmp
set snmp community read-only netjamrosnmp
!
#vtp
set vtp domain netjam
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm
set vlan 1
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off
!
#ip
set interface sc0 1 192.168.0.7/255.255.255.0 192.168.0.255
set interface sl0 down
set interface me1 down
set ip route 0.0.0.0/0.0.0.0 192.168.0.1
set ip alias default 0.0.0.0
!
#spantree
#uplinkfast groups
set spantree uplinkfast enable rate 15 all-protocols off
#vlan <VlanId>
set spantree priority 49152 1
!
#syslog
set logging console disable
!
#set boot command
set boot config-register 0x2
set boot system flash bootflash:cat4000-k8.8-3-2-GLX.bin
!
#port channel
set port channel 2/1-4 105
set port channel 2/5-8 106
set port channel 2/9-12 107
set port channel 2/13-16 108
set port channel 2/17-20 109
set port channel 2/21-24 110
set port channel 2/25-28 111
set port channel 2/29-32 112
set port channel 2/33-36 113
set port channel 2/37-40 114
set port channel 2/41-44 115
set port channel 2/45-48 116
!
#multicast filter
set igmp filter disable
!
#module 1 : 0-port Switching Supervisor
!
#module 2 : 52-port 10/100/1000 Ethernet
set port name 2/48 Router
set port flowcontrol 2/1-47 send on
set port flowcontrol 2/48 receive desired
set trunk 2/1 off dot1q 1-1005,1025-4094
set trunk 2/2 off dot1q 1-1005,1025-4094
set trunk 2/3 off dot1q 1-1005,1025-4094
set trunk 2/4 off dot1q 1-1005,1025-4094
set trunk 2/5 off dot1q 1-1005,1025-4094
set trunk 2/6 off dot1q 1-1005,1025-4094
set trunk 2/7 off dot1q 1-1005,1025-4094
set trunk 2/8 off dot1q 1-1005,1025-4094
set trunk 2/9 off dot1q 1-1005,1025-4094
set trunk 2/10 off dot1q 1-1005,1025-4094
set trunk 2/11 off dot1q 1-1005,1025-4094
set trunk 2/12 off dot1q 1-1005,1025-4094
set trunk 2/13 off dot1q 1-1005,1025-4094
set trunk 2/14 off dot1q 1-1005,1025-4094
set trunk 2/15 off dot1q 1-1005,1025-4094
set trunk 2/16 off dot1q 1-1005,1025-4094
set trunk 2/17 off dot1q 1-1005,1025-4094
set trunk 2/18 off dot1q 1-1005,1025-4094
set trunk 2/19 off dot1q 1-1005,1025-4094
set trunk 2/20 off dot1q 1-1005,1025-4094
set trunk 2/21 off dot1q 1-1005,1025-4094
set trunk 2/22 off dot1q 1-1005,1025-4094
set trunk 2/23 off dot1q 1-1005,1025-4094
set trunk 2/24 off dot1q 1-1005,1025-4094
set trunk 2/25 off dot1q 1-1005,1025-4094
set trunk 2/26 off dot1q 1-1005,1025-4094
set trunk 2/27 off dot1q 1-1005,1025-4094
set trunk 2/28 off dot1q 1-1005,1025-4094
set trunk 2/29 off dot1q 1-1005,1025-4094
set trunk 2/30 off dot1q 1-1005,1025-4094
set trunk 2/31 off dot1q 1-1005,1025-4094
set trunk 2/32 off dot1q 1-1005,1025-4094
set trunk 2/33 off dot1q 1-1005,1025-4094
set trunk 2/34 off dot1q 1-1005,1025-4094
set trunk 2/35 off dot1q 1-1005,1025-4094
set trunk 2/36 off dot1q 1-1005,1025-4094
set trunk 2/37 off dot1q 1-1005,1025-4094
set trunk 2/38 off dot1q 1-1005,1025-4094
set trunk 2/39 off dot1q 1-1005,1025-4094
set trunk 2/40 off dot1q 1-1005,1025-4094
set trunk 2/41 off dot1q 1-1005,1025-4094
set trunk 2/42 off dot1q 1-1005,1025-4094
set trunk 2/43 off dot1q 1-1005,1025-4094
set trunk 2/45 off dot1q 1-1005,1025-4094
set trunk 2/46 off dot1q 1-1005,1025-4094
set spantree portfast 2/43-48 disable
set spantree portfast 2/1-42 enable
set spantree bpdu-guard 2/1-48 disable
set spantree portinstancecost 2/10 cost 19999 mst
set spantree portinstancecost 2/14 cost 19999 mst
set spantree portinstancecost 2/20 cost 19999 mst
set spantree portinstancecost 2/23 cost 19999 mst
set spantree portinstancecost 2/24 cost 19999 mst
set spantree portinstancecost 2/25 cost 19999 mst
set spantree portinstancecost 2/26 cost 19999 mst
set spantree portinstancecost 2/28 cost 19999 mst
set spantree portinstancecost 2/29 cost 19999 mst
set spantree portinstancecost 2/30 cost 19999 mst
set spantree portinstancecost 2/31 cost 19999 mst
set spantree portinstancecost 2/32 cost 19999 mst
set spantree portinstancecost 2/33 cost 19999 mst
set spantree portinstancecost 2/34 cost 19999 mst
set spantree portinstancecost 2/35 cost 19999 mst
set spantree portinstancecost 2/36 cost 19999 mst
set spantree portinstancecost 2/37 cost 19999 mst
set spantree portinstancecost 2/38 cost 19999 mst
set spantree portinstancecost 2/39 cost 19999 mst
set spantree portinstancecost 2/40 cost 19999 mst
set spantree portinstancecost 2/42 cost 19999 mst
set spantree portinstancecost 2/43 cost 19999 mst
set spantree portinstancecost 2/47 cost 19999 mst
set spantree portinstancecost 2/48 cost 19999 mst
set spantree portinstancecost 2/49 cost -1 mst
set spantree portinstancecost 2/50 cost -1 mst
set spantree portinstancecost 2/51 cost -1 mst
set spantree portinstancecost 2/52 cost -1 mst
set spantree portcost 2/40 3100
set spantree portcost 2/41 3100
set spantree portcost 2/43 3100
set spantree portcost 2/44 3100
set spantree portcost 2/45 3100
set spantree portcost 2/47 3100
set spantree portcost 2/1,2/21,2/46 3019
set spantree portcost 2/10,2/14,2/20,2/23-26,2/28-39,2/42 3004
set spantree portvlancost 2/1 cost 3018
set spantree portvlancost 2/10 cost 3003
set spantree portvlancost 2/14 cost 3003
set spantree portvlancost 2/20 cost 3003
set spantree portvlancost 2/21 cost 3018
set spantree portvlancost 2/23 cost 3003
set spantree portvlancost 2/24 cost 3003
set spantree portvlancost 2/25 cost 3003
set spantree portvlancost 2/26 cost 3003
set spantree portvlancost 2/28 cost 3003
set spantree portvlancost 2/29 cost 3003
set spantree portvlancost 2/30 cost 3003
set spantree portvlancost 2/31 cost 3003
set spantree portvlancost 2/32 cost 3003
set spantree portvlancost 2/33 cost 3003
set spantree portvlancost 2/34 cost 3003
set spantree portvlancost 2/35 cost 3003
set spantree portvlancost 2/36 cost 3003
set spantree portvlancost 2/37 cost 3003
set spantree portvlancost 2/38 cost 3003
set spantree portvlancost 2/39 cost 3003
set spantree portvlancost 2/40 cost 3099
set spantree portvlancost 2/41 cost 3099
set spantree portvlancost 2/42 cost 3003
set spantree portvlancost 2/43 cost 3099
set spantree portvlancost 2/44 cost 3099
set spantree portvlancost 2/45 cost 3099
set spantree portvlancost 2/46 cost 3018
set spantree portvlancost 2/47 cost 3099
set port channel 2/1-48 mode off
end
Console> (enable)
