Cisco 2948G again:)

[snmza]

Got a 2948G and I would like to know if someone could help me.

I found some CatOs on net

cat4000-promupgrade.6-1-5.bin
cat4000.6-4-15.bin

And I try to upgrade my 2948G with that
this is what I get on show ver

Console> (enable) show ver
WS-C2948 Software, Version NmpSW: 6.4(15)
Copyright (c) 1995-2005 by Cisco Systems, Inc.
NMP S/W compiled on Jan 6 2005, 12:55:47
GSP S/W compiled on Jan 06 2005, 10:54:00

System Bootstrap Version: 6.1(5)

Hardware Version: 2.0 Model: WS-C2948 Serial #: JAB033406MH

Mod Port Model Serial # Versions
--- ---- ---------- -------------------- ---------------------------------
1 0 WS-X2948 JAB033406MH Hw : 2.0
Gsp: 6.4(15.0)
Nmp: 6.4(15)
2 50 WS-X2948G JAB033406MH Hw : 2.0

DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 31188K 34348K 12288K 10195K 2093K 480K 167K 313K

Uptime is 0 day, 1 hour, 58 minutes


I just want to enable http interface and configure switch over Browser . What files I need to find to do that And how to do It..

Thanks for HELP

 

[vipergg]

You need the CV (ciscoview) version of the code in order to run the gui interface . The image must have the Cv in the imagename such as cat4000-cv.8-1-1.bin .

 

[snmza]

.. any idea where to search ???

 

[vipergg]

The only official place is cisco and you need a CCO account.