cisco 2620 router - dialing every 60 seconds

[leddy]

Dear All

I have a strange one here

I have several dialer lists on my Cisco 2620

Apart from 3 I have no problems

The 3 site are connected by ISDN to Cisco 1600 or 800 routers

My router dials them every 60 seconds when connected

Check the config files and the are the same as the other 40 dialers

Any ideas on what to check next

Leddy

 

[ccie2bee]

Use "debug ip packet and debug dialer packet" to dedermine what is bring up the line. More than likely it is a routing update. Check the good interfaces to see what you are using there (ie. Snapshop routing)

 

[techie147]

Try "no cdp run" on the dialler interface as it sounds like this is bringing the line up.

 

[leddy]

Dear All

Many thanks for the replies

I think I have lead you all the wrong garden path

It is when I have connected to the site, then my redial every 60 seconds

Leddy