cisco 2600 router question

[csweetwood]

this is my situation: we have incoming Time Warner cable internet access into a ubr905. we also have a frame connection to our home office into a 2620. my question is this: can i aggregate these two connections via ethernet into my network with another 2620, routing my 10.x.x.x network to our home office x.x.x.x network and all other internet traffic through the T-W router? If so, do i need 2 additional ethernet ports on the interior 2620? (it only has one 10/100 now).
any help will be appreciated. i know i can do this with a linux or win2k box using 3 nics, but i'd prefer to use a cisco router.

thanks

chris

 

[sharb]

yes, you could do that the only thing is that the 2620 comes only with 1 Ethernet if you have a 2621 you could use that because they come with 2 ethernet. you could also get an ethernet module with 1 and 4 port Ethernet 10base-T on it for the 2620.