cisco 2600 ethernet card , help!!!

[Stingreen]

I need a simple cisco 2600 10/100 ethernet card. I can't find any in this state, not even in the internet!!! Please help, where can I find one??? Any link would be perfectly helpful.
Thank you

 

[dawookie]

Unfortunatly the the only 26xx that supports any NM-nFExxx network modules is the 2691. You can put a 16 Port switch module (NM-16ESW) in a 2600 to give you the ports but these are layer 2 ports not layer 3. Cheers

man(1) is your friend

 

[Stingreen]

Ok, I found this on the web, Do you think this would solve my problem ?

http://www.cdw.com/shop/products/default.asp?ProductID=20158

I really need a solution for this, I don't know care whatever it takes.
Thank you much.

 

[dawookie]

I appologize,

I thought that you wanted 100M connectivity. If all you need is 10M connectivity the NM-1E will work well. The NM-4E will also work and provide you with more ports.

For a listing of which modules will work in which 26xx model look at

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00800921f3.html

Cheers

man(1) is your friend