Cisco 1700 Router and BT

[brand1068]

Hi.

I'm trying to setup my 1700 router on my home DSL line.

I'm using the cisco SDM to configure but i can't seem to get the Router to connect to the DSL service.

My old Zyxel prestige 600 connects fine so it must me me thats buggering the job up.

I have a dynamic IP address - can anyone sujject setting to check.

Yours hopefully.

Chris

 

[leedsit]

Hi,

are you sure your router is talking the correct modulation are the BT switch the otherend?

LEEroy
MCNE6,CCNA2,3/4 CCNP,CWNA,CCSA,Project+

 

[brand1068]

Sorry i dont understand the question.

I've put the settings the same as my Zyxel although there are some more options on the cisco - but there at auto.

Best,

Chris

 

[leedsit]

Hi,

Sorry, Im not sure what Modulation BT use ( DMTF, D.lite ) etc and do you know if they use PPP, or Bridging???

Try this link for more information

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e5f.shtml

LEEroy
MCNE6,CCNA2,3/4 CCNP,CWNA,CCSA,Project+

 

[watchguardmonkey]

BT use ppp, post up your config.

WGM