cisco 1605r - no file in pcmcia flash

[jimlb]

we are new to cisco routers.
in "experimenting" with a 1606r i have lost the pcmcia flash and starting up in boot mode
is there a simple way to restore the default using the rsl software ?
as the unit is not "live" i am not concerned about losing any config info
thanks

 

[jwi71]

In rommon, try a sh flash to see if an IOS image is still there. From the sounds of it, I bet the flash is empty so you will have to TFTP the image onto the router.

Once the flash has a good copy of the IOS you should be all set.

J