CICS time warp

[Tritonv10]

I installed a new CICS w/7.1 software today and set the time as usual. About 10 minutes later I noticed the time was like 1am and the date was a day later than it should be (the 18th). So I set it correctly, and again 10 min later the same thing. So I then did a system startup to hopefully clear any "bugs". System came up, I set the time ang again, then 10 min later the date was a day fast. Here's the strange thing, the time seemed to keep moving thru the system power cycles...let me explain. I was there for about three hours and just before I left the T&D was 12/18 3:18am. I know the time comes up out of the box as 12am so if I was there for three hours the time kept clicking. I just want the time/date to stay correct.
So what is the fix, has anyone had this happen???

 

[jerryreeve]

If the customer has caller id and you have autotimedate set to Y you may be resetting the clock on a phone call.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 

[RikRodgers]

I think pstechnician was having a similar issue. Maybe he'll chime in.

 

[RikRodgers]

Sorry, that was ptstechnician.

 

[ptstechnician]

JerryReeve is correct, thats what was happening in my situation (the time was coming in on the caller id and update the time). Change Auto Time&Date to N.

 

[Tritonv10]

Thanks guys you were correct, it worked.

Happy Holidays

 

[jerryreeve]

you might want to rattle the local Telco to get it fixed on their end as the autotime is useful to have running after a power fail.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com