Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CICS Cover problems

Status
Not open for further replies.

vendoman

Vendor
Oct 15, 2009
60
US
Is it me or is it like digging for gold trying to get that small plastic cover off fro the CICS carrier? I use a screw driver but I seem to damage the plastic. Any suggestions?
 
It's tough to come off. I use a large slotted screwdriver and just pry hard. It'll feel like it's going to break sometimes, but I haven't yet.

Brian Cox
BC Telecom Services


 
Yea how many of us have been there, every time I have too open one its lik,$%@)*? Fxxx

Disclaimer> I could be wrong
 
I am surprised because Nortel has always been pretty logical in it's design. However on the MICS covers the little plastic lock is also easily damaged because it is made out of a soft plastic.

I will say that cleaning any Nortel device is pretty easy since the plastic they use gives up most any kind of dirt. I recommend using PLEXUS plastic spray a tooth brush and a clean cloth and you will be amazed at how great an old dirty set will come back to life and can be resold as preowned. NO oily residue left with PLEXUS either.

You can find PLEXUS on eBay.
 
it's such a pain, for me I've realized we then to want to move the little plastic peace outward when in fact you should be moving the larger piece with the clip inwards and down a bit thus freeing from the KSU
 
I don't mind the design. It's a sure tell that you've received used hardware instead of new.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top