CICS and Call Pilot

[Audioman1]

I have a CICS and am using a Norstar Flash unit. I want to change it out for a call pilot 100. Is there a minimum software level on the CICS for this to work?

 

[silver987]

I believe the specs say 4.1 BUT.. I have seen Call Pilots work on old 6x16.

Wayne T

 

[exsmogger]

As Wayne wrote, 4.1 is the minimum for a CICS or MICS. I've also seen Call Pilots work on 308, 616 and 824 with DR5.1.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[Audioman1]

Thanks for the info. Do you know where I can get the Nortel Flash repaired? It does not always pick up. And when it does you may get the greeting, but most of the time all you get is a buzz. Just started to do this. Other that that it has worked for years. Could have got corrupted I suppose.

 

[Audioman1]

Can you tell me what version my CICS is. The system info comes back as 30BCK11 NAT.

 

[exsmogger]

You have 2.0 with IRAD. There's some on this forum that can repair the Startalk Flash. ;-)

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[Audioman1]

How do I go about updating the CICS? Cost, process etc?
Where do I get the update?

 

[exsmogger]

We can't discuss prices on the forum.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[norstarboy125]

like brian said we cannot give out numbers and such but you can look for info bout getting that done.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer